5 Natural Elements That Can Damage Your Pool!

Having an outdoor pool in your backyard lets you enjoy a swim under the sun—or the moon—whenever you wish. You don’t have to leave home to treat yourself to a relaxing swim! It’s like having your private resort. Indeed, a pool is one of the best additions that you can have for your home.

However, owning a pool also comes with challenges — more specifically, pool maintenance. When you don’t maintain your pool regularly, there will come a time when it’s no longer safe for swimming.

Proper pool maintenance and upkeep will help ensure that it remains in excellent condition for the years to come. It will also be a joy to look at, adding to the appeal and value of your home. To make sure that you can maintain your pool correctly, you need to know the factors that may affect its condition. Below is a list of some of the top damage factors to watch out for that come from nature itself.

The sun’s heat and ultraviolet (UV) rays can damage your pool’s plastic materials through the years. If your pool has several plastic materials, then this means that the stability of the entire structure might be compromised. Furthermore, sunlight and heat may also cause a reaction in the chemicals used in the pool, such as chlorine. The chlorine in the pool may lose its effectiveness, resulting in algae growth.

Leaves and Other Debris
If you have trees and plants around the pool, it will be challenging to keep all the dirt, bugs, and leaves from the water. This may not seem like a big deal, but they pose huge problems. For one, acid from sap can lower the pool’s pH levels, making the water unsafe for swimming. Debris and leaves can also clog the pool’s filter baskets, affecting the pool’s cleanliness. This is why leaves and debris must be cleaned from the pool.

You might think that rain does not pose a problem. After all, it’s just water, right? However, rainwater is acidic. As a result, it can also lower the pool water’s pH levels. Acidic pool water is not suitable for swimming. If possible, make sure that your pool is covered whenever it rains.

Bacteria and Algae
When there’s not enough chlorine levels and the pool’s filtering system is not working well, the dirty pool water becomes a breeding ground for algae and bacteria. Algae can accumulate and build upon the pool’s walls and floor. Aside from making the pool water unsafe for swimming, algae can also make the pool’s surface slippery. When algae start to build up in the pool, it means the water is dirty enough to also create a conducive environment for bacteria.

If you have trees near and around the pool, you need to watch out for root growth and spread. The roots of trees are naturally attracted to a water source. They can be strong enough to break through your pool’s materials, eventually creating a crack and breaking through the pool’s walls or floor.

If nature’s elements are giving you a hard time, do not hesitate to consult a professional for tips and assistance to better manage your outdoor pool.

Purple Heart Pools is a top-rated pool maintenance company in Jacksonville, get in touch today to see how we can help.

Our Guide to Hot Tub Maintenance

Hot tubs are an excellent place for people to unwind and relax. These pools can be for private or communal use. Regardless of the kind of hot tub you own or operate, you need to keep it well-maintained and hygienic at all times. Here are some of the most vital maintenance tips for your hot tub:

Surface cleaning tips

Strong chemicals and rough scouring pads can cause damage to your hot tub’s surfaces over time. Instead, remove the build-up of grime on said surfaces using a nylon scrubber or soft rag. Use mild, non-abrasive, and non-foamy cleansers when you do this. For minor cleaning tasks, you can use regular baking soda as a cleanser. There are also products that you can buy to keep the glazed surfaces of your hot tub shiny.

To clean your hot tub’s vinyl door, prepare a mild soap solution of baking soda or one teaspoon dishwashing liquid mixed per eight liters of water. Use a sponge to apply the solution before rinsing it off with a stream of water from a hose. Open the vinyl door and wash the other side with water before wiping it down with a dry rag.

Proper pool use tips

Make sure to shower with fresh water before you soak in your hot tub. Doing this will ensure that no soap or detergent residue from your body or bathing suit will leave itself on your hot tub’s filters. This will extend the filters’ lifespan. Also, use the soapless rinse cycle instead of washing your bathing suit in soapy water.

When you fill your hot tub with water, use a pre-filter to ensure that the water that goes into your hot tub is clean. The pre-filter can be attached to your hose to screen out metal ions, tannins, and organic contaminants that can ruin your water and hot tub.

When you’re done, drain the used water and refill your hot tub with a fresh supply of water. Make sure to follow the instructions in the pool manufacturer’s manual when draining and refilling. Draining and refilling will remove the detergent and soap particles that could have collected on the surface of your hot tub over time.

Spa filter cartridges tips

Your spa filter cartridges accumulate debris and mineral deposits over time. Thus, you need to unclog your filters regularly to keep your hot tub’s water flow running smoothly. Rotate your hot tub’s spray cartridges as you flush it with a jet of water to expel any particles that may have blocked the filter’s pleats. If your hot tub has been using a spa filter cartridge for three or more years, replace it with a new cartridge since the pleats may have been worn down.

Pool water chlorination tips

Chlorination helps make the water in your hot tub hostile to bacteria and renders other organic and chemical impurities in the water inert, ensuring your water’s cleanliness. Chlorinate your spa water according to the instructions of the chlorine solution manufacturer. Be careful not to use more chlorine solution then is recommended to prevent skin, eye, and lung irritation.

Energy efficiency tips

A hot tub’s energy efficiency refers to the amount of electricity it uses to keep the water warm. Make sure that the seal of the hot tub’s doors is tight to prevent heat from escaping. If there are signs of fading, cracking, and sagging in your hot tub’s door, replace it with a new one.

You should also ensure the energy efficiency of your hot tub’s heating system, especially during the winter. To protect the sensitive components of the pool’s heating system from freezing damage, wrap a vinyl-fiberglass winter blanket around your hot tub when it’s not in use.

Purple Heart Pools is a top-rated spa maintenance company in Jacksonville, get in touch today!